Author Topic: Rib Gussets  (Read 297 times)

Offline Monty

  • Newbie
  • *
  • Posts: 1
  • Total likes: 1
  • New Member
  • OS:
  • Windows Vista/Server 2008 Windows Vista/Server 2008
  • Browser:
  • Firefox 52.0 Firefox 52.0
Rib Gussets
« on: April 20, 2021, 02:41:20 AM »
Does anyone have a good method of cutting out rib gussets, very time consuming? Consistency is also very important.

Offline Kamcoman77

  • Donor 2021
  • *
  • Posts: 236
  • Total likes: 115
  • LE-XL H-51
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 89.0.4389.128 Chrome 89.0.4389.128
Re: Rib Gussets
« Reply #1 on: April 20, 2021, 12:21:22 PM »
Stacked 28 sheets of 0.8mm ply with paper pattern on top. Drilled holes in a few places. Glued toothpicks in holes to keep stack aligned. Cut stack with bandsaw. Light sanding of edges and ready for ribs.

Offline scottiniowa

  • Hero Member
  • *****
  • Posts: 477
  • Total likes: 65
  • Scott-In-Iowa
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 90.0.4430.93 Chrome 90.0.4430.93
    • Display of helpful hits and tricks
  • Eagle Type: Legal E- XL
Re: Rib Gussets
« Reply #2 on: April 26, 2021, 07:37:03 PM »
Outstanding, and remember with good planning, there is very little waste!
best email address:  irondesignairparts@gmail.com

Offline Suomelainen

  • Jr. Member
  • **
  • Posts: 14
  • Total likes: 2
  • New Member
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 90.0.4430.93 Chrome 90.0.4430.93
Re: Rib Gussets
« Reply #3 on: April 27, 2021, 05:08:41 AM »
Nicely done.

 

SimplePortal 2.3.7 © 2008-2021, SimplePortal