Author Topic: aileron control horn  (Read 483 times)

Offline airman

  • Full Member
  • ***
  • Posts: 33
  • Eagle Type: double eagle
aileron control horn
« on: April 05, 2017, 06:21:35 AM »
How far down is the control horn on the bottom of the aileron? No dimensions in plans just shows mounting holes. I am thinking around 3 3/4 in.

Offline Larry H

  • Jr. Member
  • **
  • Posts: 24
  • Air Buggy
Re: aileron control horn
« Reply #1 on: April 05, 2017, 12:15:50 PM »
On page 49 of my Legal Eagle XL plans and page 55 of my Double Eagle Plan, it shows the aileron control horn to be 6" long. Two close holes are 2" apart that bolts to the end aileron rib. The shown measurement is three inches between the bottom of the two top holes to the pushrod bottom hole. Hope this makes sense.

Larry H

Offline Larry H

  • Jr. Member
  • **
  • Posts: 24
  • Air Buggy
Re: aileron control horn
« Reply #2 on: April 05, 2017, 12:26:43 PM »
One correction, the Double Eagle Aileron Horn is 2 7/8" center to center between the bottom hole of the two top holes and the bottom pushrod hole. Not 3" like the Legal Eagle XL

Larry H

Offline airman

  • Full Member
  • ***
  • Posts: 33
  • Eagle Type: double eagle
Re: aileron control horn
« Reply #3 on: April 05, 2017, 02:08:29 PM »
I need to know how far the horn sticks down below the aileron? Thanks for the help.

Offline MrG

  • Full Member
  • ***
  • Posts: 172
  • Builder - Pilot
  • Eagle Type: DE E-77
Re: aileron control horn
« Reply #4 on: April 05, 2017, 02:52:03 PM »
Is this is what you are after ?
MrG
Temora Airport  Australia
1st Aussie DE built / flown
19-8866
-----------------------------
1 Oct 2015 First Flight
30th April 2018 - 115 hrs Flown

Offline airman

  • Full Member
  • ***
  • Posts: 33
  • Eagle Type: double eagle
Re: aileron control horn
« Reply #5 on: April 05, 2017, 02:57:45 PM »
Yes Thank you very much.