Author Topic: 1/2 or full vw kit  (Read 1090 times)

Offline oldcrow

  • Newbie
  • *
  • Posts: 6
  • Total likes: 10
  • New Member
  • OS:
  • Windows NT 6.3 Windows NT 6.3
  • Browser:
  • Chrome 80.0.3987.87 Chrome 80.0.3987.87
1/2 or full vw kit
« on: February 11, 2020, 03:21:03 PM »
i am fishing to see if there is an interest for anyone looking to purchase a 1/2 or full vw kit with all new parts. I have been checking on the only 2 suppliers i could find (hummel, and greatplains) and their kits are around $3500.00+ my friend is an EMPI dealer and could probably put a kit together for less. (of course for the half vws you still need to get the plans and do all the cutting yourself) and i think he can get the SCAT single heads complete for around 300 each(bolt on covers) which are a lot easier than cutting.
if you are somewhat interested just like the page. if you are really interested just email me with what you are looking for (stroke. bore, cast or forged pistons ect...) and i will try to get a price up for you.

Offline Theodore

  • Full Member
  • ***
  • Posts: 133
  • Total likes: 19
  • Theodore W Otteson
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 85.0.4183.102 Chrome 85.0.4183.102
  • Eagle Type: XL
Re: 1/2 or full vw kit
« Reply #1 on: September 16, 2020, 06:05:51 AM »
Scat split port heads for 1/2 vw aero engine, i thought good idea too but readup on 'em, now not so sure. yes considering still, I would want two 92mm, please more info!
Thank you
""Take care of your wish""

Offline pappyadkins

  • Jr. Member
  • **
  • Posts: 12
  • Total likes: 9
  • New Member
  • OS:
  • Mac OS X 10.15.6 Mac OS X 10.15.6
  • Browser:
  • Safari 14.0 Safari 14.0
  • Eagle Type: Legal Eagle
Re: 1/2 or full vw kit
« Reply #2 on: November 30, 2020, 06:32:24 PM »
Saw SCAT 1/2 heads on a LE at Reklaw Flyin in October... Looked real good... They had the intake straight out rear just like Leonards, but aren't made anymore... Then saw the ones with intake out the top & was planing to go this route, but cost was way more than 300... so I may be in too (92mm for me as well)


SimplePortal 2.3.7 © 2008-2021, SimplePortal