Eagler's Nest

Airframes => Single Seaters => XL => Topic started by: misterbill1964 on April 13, 2016, 05:10:41 AM

Title: Tail ribs
Post by: misterbill1964 on April 13, 2016, 05:10:41 AM

I am just starting to get ready to build and Looking on the plans the only dimensions i can find say 1/4 " for the sides , but research says at least 2 rivets from the edge so what size are the ribs being made?

Title: Re: Tail ribs
Post by: joecnc2006 on April 13, 2016, 07:05:40 AM

I made mine roughly 1/2" high. 1/4 was to short to me.
http://www.eaglersnest.com/forum/index.php?topic=1054.msg6349#msg6349