Eagler's Nest

Airframes => Double Seaters => Topic started by: MrG on June 26, 2016, 01:58:27 AM

Title: Cooling Baffles for the 4cyl Engine
Post by: MrG on June 26, 2016, 01:58:27 AM

any one got any good photos on there 4 cyl eng ?

Title: Re: Cooling Baffles for the 4cyl Engine
Post by: Steve on June 26, 2016, 12:24:00 PM

Quote from: MrG on June 26, 2016, 01:58:27 AM

any one got any good photos on there 4 cyl eng ?

Look in the Gallery at the Yahoo Group photos - Link: especially 'Joao in Brazil' (http://www.eaglersnest.com/forum/index.php?action=gallery;cat=57) who has run his DE hard... Reach out to swferris on the Member list to see how his engine is holding up and what he has for baffles...

Remember to clean the cylinder head casting flash out around the exhaust ports, use the between cylinder VW tin on the bottom of the engine, be sure your top tin is far enough forward to force the air down around #2 &4 exhaust valves...

I've pulled this photo from the Gallery in the Yahoo Group photo section - it's Ed in Florida's early build:

http://www.eaglersnest.com/forum/gallery/medium_1-120316193235-10921756.jpeg

Title: Re: Cooling Baffles for the 4cyl Engine
Post by: MrG on July 18, 2016, 03:30:05 AM

thats what i was looking fr thanks Steve