Eagler's Nest

Engines => 2 Cylinder => 1/2 vw => Topic started by: joecnc2006 on October 10, 2016, 09:00:42 AM

Title: Plugs
Post by: joecnc2006 on October 10, 2016, 09:00:42 AM

For those of you using the Slick Mag, what are you using for plugs, the end conectors have the spring which fits down inside the standard Aero plugs ie champion and tempest, is there a way to adapt to a standard plug. change wires etc. what has people done or seen.

Title: Re: Plugs
Post by: Tom H on October 11, 2016, 06:24:56 AM

We converted our original Slick shielded mag wires to automotive RF suppression wires with automotive type rubber plug boots.  I purchased a blank mag cap to use, instead of cannibalizing the original cap/wire set.  This was on DE Stubby, to reduce ignition noise in the radio.  It works fine.

If I am successful, there should be a pdf document attached on how it is done.

Title: Re: Plugs
Post by: Mike on October 11, 2016, 07:30:52 PM

Greatplanes sells this adaptor
http://greatplainsas.com/scspkplug.html