Eagler's Nest

Airframes => Single Seaters => XL => Topic started by: 914pete on September 20, 2017, 06:44:35 AM

Title: Control Stick
Post by: 914pete on September 20, 2017, 06:44:35 AM

I'm not seeing the dimension between the torque tube and the control stick.  I see the stick is 16 1/2" long and the brackets 6" but no dimension between the two.  Also, no dimension referencing the location of the stick brackets on the torque tube.  Builder preference?

Title: Re: Control Stick
Post by: PropMan on September 25, 2017, 12:23:11 PM

Pete,
Builder preference is what i did. Had the seat in and sat there , moved it around till i was comfortable with it. if you need i can get the dimensions later.

Title: Re: Control Stick
Post by: 914pete on September 25, 2017, 01:00:43 PM

Quote from: PropMan on September 25, 2017, 12:23:11 PM

Pete,
Builder preference is what i did. Had the seat in and sat there , moved it around till i was comfortable with it. if you need i can get the dimensions later.

Thanks.  I did the same thing.  Sat in the seat and moved the stick around while imagining the wind blowing through my hair.