Eagler's Nest

General Category => Builders logs => Paul's DE/CE build => Topic started by: Kiwi55 on June 14, 2018, 06:02:20 AM

Title: Fuselage is covered
Post by: Kiwi55 on June 14, 2018, 06:02:20 AM

Well the fuselage is covered. I still have a couple of tapes to add, I need to complete the inspection rings and make the exits for the rudder and elevators. The underside is primed. I used latex primer, six thin coats with sanding between (although with a foam brush very little sanding is required.
...

Title: Re: Fuselage is covered
Post by: Kiwi55 on July 05, 2018, 12:23:34 PM

And painted.
Used Latex. Looks good at 20 feet. Not the paints fault, better pre and better masking tape would have resulted in a better job.

Title: Re: Fuselage is covered
Post by: Poorman2 on July 05, 2018, 02:37:25 PM

I like it Paul. :emoji_u1f601: Making progress! I like your color choices.

Title: Re: Fuselage is covered
Post by: Vince Carucci on July 05, 2018, 06:44:01 PM

I like the landing gear!

Title: Re: Fuselage is covered
Post by: Kiwi55 on July 06, 2018, 06:13:11 AM

They said I should save weight...:)