Eagler's Nest

Airframes => Double Seaters => Topic started by: dferr34 on December 17, 2020, 06:25:39 PM

Title: Double Eagle control stick
Post by: dferr34 on December 17, 2020, 06:25:39 PM

Hi guys, I'm trying to build the control stick. I took some pics to try and explain my dilemma but I can't post from my computer. I guess that's another dilemma. Anyway, I'm a little confused on where to weld the 1" angle cut from the 1" square tube, and also the holes in the angle for the pivot and the stop, I know the pivot is a 1/4" dia. but what is the stop diameter?

Thanks,
Don

Title: Re: Double Eagle control stick
Post by: Dan_ on December 18, 2020, 12:29:02 PM

How to post pics...

https://www.eaglersnest.com/forum/index.php?topic=1864.msg10573#msg10573 (https://www.eaglersnest.com/forum/index.php?topic=1864.msg10573#msg10573)

edit:  use the pause and rewind buttons if it seems to be covering a lot of ground too quickly... :)