Eagler's Nest

Airframes => Single Seaters => XL => Topic started by: Shay King on November 21, 2026, 06:44:19 AM

Title: Windscreen
Post by: Shay King on November 21, 2026, 06:44:19 AM
I’ve just finished attaching forward fuselage sides and windscreen using Dzus fasteners. The sides are .016 aluminium with some not very straight beads rolled into them. They are quite stiff though. The windscreen is 1mm polycarbonate. I’m not sure if it’s going to be thick enough.
Comments welcome.
Title: Re: Windscreen
Post by: Brock on November 21, 2026, 08:55:01 AM
how did you make those beads?  I've always wondered about doing that.
Will you be cutting out the windshield for a hand hold spot?
Title: Re: Windscreen
Post by: Shay King on November 21, 2026, 09:54:25 AM
I bought a cheap manual bead roller, you can just about see it in the background in the first photo, it’s red. It does the job but it’s hard to turn the handle and keep the sheet of metal moving in a straight line. Ideally should have someone else to help.
I haven’t decided about the cutout for the handhold yet. I have welded a bracket on the landing gear leg for a mudguard and I think it’s strong enough to put a foot on when getting in to the cockpit.
Title: Re: Windscreen
Post by: Tom H on November 22, 2026, 06:08:07 AM
Your polycarbonate windscreen will be plenty strong.
SimplePortal 2.3.7 © 2008-2026, SimplePortal