Eagler's Nest
General Category => Off Topics and General Interest => Topic started by: Pradeep ks achary on October 02, 2014, 11:09:41 AM
-
Sir I want know regarding a crank balancing for 1/2 VW, How can I make a crank balance in home ?
Please anyone knows about it try to hep me ...
-
Sir I want know regarding a crank balancing for 1/2 VW, How can I make a crank balance in home ?
Please anyone knows about it try to hep me ...
Scott Casler sells engine plans that include crankshaft modification details and has counterweights to sell plus assembly balancing services: http://hummelengines.com
(http://hummelengines.com)
Further description of the balancing process is found in this .pdf file on pages 5-7: http://www.ultraligero.net/Descargas/Manuales/1_2_VW/manual.pdf (http://www.ultraligero.net/Descargas/Manuales/1_2_VW/manual.pdf)
-
Thank you Dear Mr: Steve
One more thing is there any simple method, as we do the prop because the crank was from Mr: Scott and there was little welding projection
on the third bearing ( the bearing with flange ) so discussed with Mr: Scott and decided to make slight machining, Now the machining completed
at this moment how can I do myself without sending very far from here . And I am working in United Arab Emirates so please ...
Pradeep
-
Thank you Dear Mr: Steve
One more thing is there any simple method, as we do the prop because the crank was from Mr: Scott and there was little welding projection
on the third bearing ( the bearing with flange ) so discussed with Mr: Scott and decided to make slight machining, Now the machining completed
at this moment how can I do myself without sending very far from here . And I am working in United Arab Emirates so please ...
Pradeep
The total machining for the thrust bearing at the #3 VW main bearing saddle is going to have a tiny effect on the balance done by Casler... The Balance Masters prop/crank balance disk http://store.balancemasters.com/osCommerce/product_info.php?cPath=25&products_id=243 (http://store.balancemasters.com/osCommerce/product_info.php?cPath=25&products_id=243) would account for any balance changes that I understand you to be making with additional machining...