Eagler's Nest

General Category => Off Topics and General Interest => Topic started by: rockiedog2 on November 19, 2013, 06:46:53 PM

Title: Removing plastic film from aluminum sheet
Post by: rockiedog2 on November 19, 2013, 06:46:53 PM

try this. much easier than pulling at it with fanghurs
Spencer

Title: Re: Removing plastic film from aluminum sheet
Post by: rockiedog2 on November 19, 2013, 06:49:17 PM

hey SK/Dan can you rotate the pic in this info post. sorry...i dont know how
Spencer
beta tester

Title: Re: Removing plastic film from aluminum sheet
Post by: Dan_ on November 20, 2013, 02:32:01 AM

Done...  I used "paint"...  It has rotate button.:clap:

Title: Re: Removing plastic film from aluminum sheet
Post by: rockiedog2 on November 20, 2013, 03:25:48 AM

It was right when I sent it. Got rotated enroute somehow
Once it gets to the site I don't have a clue
Thanks
Joe

Title: Re: Removing plastic film from aluminum sheet
Post by: weasel on November 20, 2013, 06:31:49 AM

Use an old broom handle.  AL tubing is a precious metal.


(https://www.eaglersnest.com/forum/proxy.php?request=http%3A%2F%2Fwww.kitconet.com%2Fcharts%2Fmetals%2Fbase%2Fspot-aluminum-5y-Large.gif&hash=fcaf2fec0c902749620c96ce348cbc423d0cb607)

Title: Re: Removing plastic film from aluminum sheet
Post by: rockiedog2 on November 20, 2013, 12:40:02 PM

naw Weasel we're not using it up. we put it back in the pile when we get the plastic pulled
that broom handle doesnt have enough leverage...if you leave it sittin around as long as i do the stuff is really stuck