Eagler's Nest

Airframes => Double Seaters => CE => Topic started by: Steve on January 21, 2015, 02:10:00 PM

Title: CE - 1st Taxi test . . .
Post by: Steve on January 21, 2015, 02:10:00 PM

Hi guys ,
 Yesterday I taxied the Cabin Eagle found several things that had to be
changed. Seat needs to be moved forward about 4 inches. Throttle was
sticking choke needs re adjusting and rudder pedals need to be made taller.
I got the tail up for a while it comes right up. Feel very good about the
way it handled on the turns etc Leonard

Title: Re: CE - 1st Taxi test . . .
Post by: cluttonfred on January 27, 2015, 12:24:34 PM

Bravo, Leonard! l am not alone in looking forward to the day that the CE design is finalized and the plans ready for amateur builders!

Title: Re: CE - 1st Taxi test . . .
Post by: cluttonfred on September 08, 2015, 09:35:01 PM

Steve (or Leonard), any news on the Cabin Eagle? It's been quite some time since we've had an update here, and even the Facebook page has had no word since reporting that the CE had passed FAA inspection back in April. Cheers, Matthew

Title: Re: CE - 1st Taxi test . . .
Post by: Steve on September 10, 2015, 03:46:07 PM

Quote from: cluttonfred on September 08, 2015, 09:35:01 PM

Steve (or Leonard), any news on the Cabin Eagle? It's been quite some time since we've had an update here, and even the Facebook page has had no word since reporting that the CE had passed FAA inspection back in April. Cheers, Matthew

From: Leonard Milholland (leonard@lemilholland.com)
Sent: ‎9/‎10/‎2015 1:51 PM
To: John Bolding (jhb478@yahoo.com); Steve Kiblinger (SKiblinger@cs.com)
Subject: liftoff

Hi Guys,
Got the Cabin Eagle out today and lift it off and flew down the runway. Found that I needed work on the tail wheel and have done that so will try again asap Leonard

Title: Re: CE - 1st Taxi test . . .
Post by: cluttonfred on September 15, 2015, 09:33:42 PM

Great news, thanks, hope to see photos or videos with air under the wheels soon! Cheers, Matthew

Title: Re: CE - 1st Taxi test . . .
Post by: Richfroh on September 17, 2015, 09:59:36 PM

That's great news! Keep us posted.