Eagler's Nest
Airframes => Double Seaters => Topic started by: buzzypeterson on May 18, 2015, 03:19:25 PM
-
Hey guys, I have my spar done and now getting ready to put the wing attach steel fittings on after I put the hard wood filler in and the plywood, my question is I have the intercostles in on the spar, that first intercostle is right where the block of wood should be, do I fill in, in between the first two verticals with hard wood? is that one vertical not supposed to be there, maybe that part is to be hollow??
-
no idea how to explane in text but here is a link to my build photos if that helps
https://plus.google.com/u/0/photos/104732765163269020771/albums/6011178877987868273
-
Yours looks much nicer than mine. But mine was just for practice out of Home Depot wood. We are going to load test it. Just finally got spruce today.
-
You show the strut fitting as 3 pieces of wood. Then in the later picture where it says "infill fitted" it looks like it's one piece. Did you use 3 pieces or make it out of one?
-
the infill piece was 3 piece strut attach and 1 piece at wing attach
better image https://goo.gl/photos/g3Dt3pyQvPnYqxjP6
-
I get it, thank you very much.