Eagler's Nest
Airframes => Double Seaters => DE => Topic started by: John Reinking on October 02, 2015, 07:34:27 PM
-
Well, the ribs are done and in the back bedroom. Work table set up and waiting for plastic to make a larger base for the router for scarfing the sparcaps.
Question re spar webs: On the DE plans I see the note for the inb'd spar caps webbing as being 96". Don't mean to sound ignorant but does that (1) preclude using 48" lengths of the 1/8" ply to achieve the referenced 96" or does that mean a single 96" length of plywood? (2) Am wondering if cutting those lengths so that a 48" section (centered at the spar cap splice) over the length of the spar would be okay. Thanks, guys.