Author Topic: XL vs Legal Eagle Fuselage Dimension  (Read 370 times)

Offline Kamcoman77

XL vs Legal Eagle Fuselage Dimension
« on: December 22, 2019, 11:29:53 AM »
I know the XL fuselage is longer overall than the standard Eagle. My XL plans show 21-1/4" between Sta 2 & Sta 3 along the fuselage sides. Can anyone tell me if the standard Eagle has the same dimension, or is it shorter?

Offline JohnB

Re: XL vs Legal Eagle Fuselage Dimension
« Reply #1 on: December 23, 2019, 08:58:44 AM »
My L E drawings show 21"  between 2 &3   JohnB

Offline Kamcoman77

Re: XL vs Legal Eagle Fuselage Dimension
« Reply #2 on: December 23, 2019, 10:24:26 AM »
Thank you. So only 1/4" difference.

Offline kalazzerx

Re: XL vs Legal Eagle Fuselage Dimension
« Reply #3 on: December 23, 2019, 06:15:18 PM »
I believe the biggest difference is with the width between the two - 19/20 inch versus the 24 on XL

Offline JohnB

Re: XL vs Legal Eagle Fuselage Dimension
« Reply #4 on: January 13, 2020, 08:02:59 AM »
Most builders don't catch this as the prototype is built to 24" wide but my drawings state that 24" is the MAX width, not necessary to build it that wide unless you want/need to.   John

Offline Steve

  • Steve Kiblinger
  • Staff
  • *
  • Posts: 664
  • Total likes: 38
  • Flying
    • Legal Eagle serial #33
  • Eagle Type: Legal Eagle(LE)
Re: XL vs Legal Eagle Fuselage Dimension
« Reply #5 on: January 13, 2020, 05:05:00 PM »
This is me doing ground runs before 1st flight of LE #33 - I wear a 42 xxl jacket and am 6'2" - notice how that 19" wide cab :( fits:


Offline JohnB

Re: XL vs Legal Eagle Fuselage Dimension
« Reply #6 on: January 17, 2020, 07:27:23 PM »
Should read my posts before hitting "send"   these are LEONARDS drawings    not mine, no clue where that thought came from     back to your regular programming

Offline Wescraft

Re: XL vs Legal Eagle Fuselage Dimension
« Reply #7 on: January 23, 2020, 08:51:21 PM »
Pretty neat how you ghost from the engine to the seat Steve. Seriously though, any suggestions for a guy who's 6' 4"? I've contemplated raising the wing slightly, like 2-3" for head room?

 


SimplePortal 2.3.7 © 2008-2020, SimplePortal