Author Topic: Engine: Verner 3VLA  (Read 119421 times)

Offline Brock

  • Donor 2026
  • *
  • Posts: 326
  • Total likes: 411
  • flu-flu
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 156.0.0.0 Chrome 156.0.0.0
  • Eagle Type: XL
Re: Engine: Verner 3VLA (Mikuni 26-606)
« Reply #60 on: November 03, 2026, 09:10:50 AM »
It's very unscientific to choose a carb based on heresay but that's what I did.  Less (& others too, I believe) said that they are using the Mikuni 26-606 on their Verner.  The price was $111 which seemed reasonable for a try.  Yesterday I got the little (fuel) squirt mounted but before doing that I took a few pictures.

The small bore on this thing has me wondering  :-\  if it's going to be able to get the job done at full throttle.  Well, it should idle nicely if nothing else.  I like that it has the choke handle on the carb.  Since I'll be hand-propping this will be just purfect.
s/n: WEB-14, 3VLA
flu-flu: type of arrow that travels slow for short distance.


Offline Shay King

  • Full Member
  • ***
  • Posts: 125
  • Total likes: 152
  • New Member
  • OS:
  • Mac OS X 10.15.7 Mac OS X 10.15.7
  • Browser:
  • Safari 17.14 Safari 17.14
Re: Engine: Verner 3VLA
« Reply #61 on: November 03, 2026, 10:16:45 AM »
I haven’t decided on a carb for my 3v yet. I’m curious about how to prevent carb icing. Are some carbs more prone to it than others? Has it been a problem for any of you guys?

Offline Brock

  • Donor 2026
  • *
  • Posts: 326
  • Total likes: 411
  • flu-flu
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 156.0.0.0 Chrome 156.0.0.0
  • Eagle Type: XL
Re: Engine: Verner 3VLA
« Reply #62 on: November 03, 2026, 07:23:33 PM »
I haven’t decided on a carb for my 3v yet. I’m curious about how to prevent carb icing. Are some carbs more prone to it than others? Has it been a problem for any of you guys?

Please keep posts to build logs on-topic, else start a new thread.
s/n: WEB-14, 3VLA
flu-flu: type of arrow that travels slow for short distance.

Offline Shay King

  • Full Member
  • ***
  • Posts: 125
  • Total likes: 152
  • New Member
  • OS:
  • Mac OS X 10.15.7 Mac OS X 10.15.7
  • Browser:
  • Safari 17.14 Safari 17.14
Re: Engine: Verner 3VLA
« Reply #63 on: November 04, 2026, 03:54:00 AM »
Sorry Brock, just saw carbs and started typing.

Offline Brock

  • Donor 2026
  • *
  • Posts: 326
  • Total likes: 411
  • flu-flu
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 157.0.0.0 Chrome 157.0.0.0
  • Eagle Type: XL
Re: Engine: Verner 3VLA (air filter)
« Reply #64 on: November 13, 2026, 09:07:39 PM »
The 26-606 turned out to be longer than I exptected.  Mostly due to the rubber mount and also the vent lines get in the way of some air-filter solutions.  So, this is what I came up with.  I was needing something else to print on the 3D printer anyway.  The filter seems small but in actuality for 40 HP it should be fine.  What do you think?

After I find the final location for the filter I'll add some 2" SCAT tubing and be done with it.
s/n: WEB-14, 3VLA
flu-flu: type of arrow that travels slow for short distance.

Offline Chuck in Indiana

  • Donor 2026
  • *
  • Posts: 928
  • Total likes: 1358
  • New Member
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Firefox 159.0 Firefox 159.0
  • Eagle Type: LEXL #H-58
Re: Engine: Verner 3VLA
« Reply #65 on: November 14, 2026, 07:47:43 AM »
The filter should be fine, it's used on fairly high horsepower motorcycles.

Offline Brock

  • Donor 2026
  • *
  • Posts: 326
  • Total likes: 411
  • flu-flu
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 157.0.0.0 Chrome 157.0.0.0
  • Eagle Type: XL
Re: Engine: Verner 3VLA
« Reply #66 on: November 16, 2026, 04:43:22 PM »
Picked up a bag of sand today.  I checked the weight before I picked it up and tossed on my shoulder.  Weight 22.7, it was nice to find a small bag since they usually sell 50# bags..  Waiting for the very slow sales exchange in front of me which seemed to get slower as my shoulder started to ache.  Finally I was able to set it down and pluck a few light weight bills from my pocket.  As I set it down I noticed, again, the weight.  But this time I realized it was 22.7 Kg not lb.  Ahhh haa, so it it was 50#'s afterall and thus the explaination for a sore shoulder.  As to why I need sand, that will remain a mystery until I have a picture or two to go along.

This wordy post is not about sand but pipes.  My exhaust pipes for the Verner arrived today.  Got them from STUDZ racing.  The only place I could find 1-1/8" 'L' pipes.  they seem heavy at 10.6oz each.  The steel is .050" thick.  Looks like I'll be welding tomorrow.
s/n: WEB-14, 3VLA
flu-flu: type of arrow that travels slow for short distance.