Author Topic: elevator fairlead placement  (Read 2258 times)

Offline grdev

elevator fairlead placement
« on: April 02, 2014, 01:55:06 PM »
on page 15 on the XL drawings it shows roughly where the fairleads should go. I ran a string and figured out where they all should go with the exception of the two right before the elevator horn. Are there any close up photos of those two, or better yet some dimensions? I'm starting to get surface rust and I want to get all my brackets I can welded in so I can put a little primer on.

Thanks

Offline rockiedog2

Re: elevator fairlead placement
« Reply #1 on: April 02, 2014, 05:08:39 PM »
>>>I'm starting to get surface rust

squirt it down with WD40

Offline Mike Gracey

Re: elevator fairlead placement
« Reply #2 on: April 03, 2014, 03:25:34 AM »
Good tip Joe

Mike

 


SimplePortal 2.3.7 © 2008-2020, SimplePortal