Author Topic: Cooling Baffles for the 4cyl Engine  (Read 962 times)

Offline MrG

  • Full Member
  • ***
  • Posts: 177
  • Builder - Pilot
  • Eagle Type: DE E-77
Cooling Baffles for the 4cyl Engine
« on: June 26, 2016, 01:58:27 AM »
any one got any good photos on there 4 cyl eng ?
MrG
Temora Airport  Australia
1st Aussie DE built / flown
19-8866
-----------------------------
1 Oct 2015 First Flight
30th April 2018 - 115 hrs Flown

Offline Steve

  • Steve Kiblinger
  • Staff
  • *
  • Posts: 641
  • Flying
    • Legal Eagle serial #33
  • Eagle Type: Legal Eagle(LE)
Re: Cooling Baffles for the 4cyl Engine
« Reply #1 on: June 26, 2016, 12:24:00 PM »
any one got any good photos on there 4 cyl eng ?
Look in the Gallery at the Yahoo Group photos - Link: especially 'Joao in Brazil' who has run his DE hard... Reach out to swferris on the Member list to see how his engine is holding up and what he has for baffles...

Remember to clean the cylinder head casting flash out around the exhaust ports, use the between cylinder VW tin on the bottom of the engine, be sure your top tin is far enough forward to force the air down around #2 &4 exhaust valves...

I've pulled this photo from the Gallery in the Yahoo Group photo section - it's Ed in Florida's early build:


Offline MrG

  • Full Member
  • ***
  • Posts: 177
  • Builder - Pilot
  • Eagle Type: DE E-77
Re: Cooling Baffles for the 4cyl Engine
« Reply #2 on: July 18, 2016, 03:30:05 AM »
thats what i was looking fr thanks Steve
MrG
Temora Airport  Australia
1st Aussie DE built / flown
19-8866
-----------------------------
1 Oct 2015 First Flight
30th April 2018 - 115 hrs Flown