« previous next »
Pages: [1]   Go Down

Author Topic: Allowable crank/prop runout with a dial  (Read 6627 times)

Offline Frankh

  • Newbie
  • *
  • Posts: 8
  • Total likes: 0
  • Frankh
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 64.0.3282.140 Chrome 64.0.3282.140
  • Eagle Type: LEU 55L Flying
Allowable crank/prop runout with a dial
« on: November 05, 2018, 07:14:03 PM »
Curious as to what the specification of any allowable crank/prop runout might be on a 1/2 vw?
Logged

Offline Leonard

  • The Boss
  • *
  • Posts: 80
  • Total likes: 27
  • Designer
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Mozilla compatible Mozilla compatible
    • Better Half VW
Re: Allowable crank/prop runout with a dial
« Reply #1 on: November 07, 2018, 01:14:14 PM »
Hi Guy,
 The run out should be as small as you can get it.  one may shim the prop flange to get the tip of the prop right on the money. I would say less than 1/16 inch is good.   Leonard
Logged

Offline Frankh

  • Newbie
  • *
  • Posts: 8
  • Total likes: 0
  • Frankh
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 64.0.3282.140 Chrome 64.0.3282.140
  • Eagle Type: LEU 55L Flying
Re: Allowable crank/prop runout with a dial
« Reply #2 on: November 08, 2018, 03:42:48 PM »
Thank You Leonard...
Waiting for a loaner dial gauge.
Frankh
Logged
Pages: [1]   Go Up
« previous next »