Author Topic: Lexl gear springs pre-load?  (Read 483 times)

Offline Mark Kramer

Lexl gear springs pre-load?
« on: September 08, 2019, 06:15:42 PM »
If you don’t preload,will the 1 inch slots be used up by the weight of the plane and pilot? Also should I start with the axles with a slightly downward angle so they come back closer to level when the plane is weighted up? Also has anyone ever heard of a little toe in or out to stop hunting down the runway?


SimplePortal 2.3.7 © 2008-2020, SimplePortal