Author Topic: rear stab connector  (Read 2084 times)

Offline grdev

rear stab connector
« on: April 09, 2014, 05:01:02 PM »
The drawings , page 19, call for a 7/8 .062" tube to slide over your rear stabilizer mounts 3/4" tubes .  Would it be harmful to use 5/8" 4130 and slide them inside the 3/4" stabilizer tubes instead?. As for as I can tell it would just be a matter of supporting the stabilizer tube internally instead of externally and work equally as well, but I could be missing something. .I have the 5/8 but not the 7/8 on hand.

Offline grdev

Re: rear stab connector
« Reply #1 on: April 11, 2014, 06:14:19 AM »
If you don't have any 7/8" .062 tubing, Leonard said it is ok to try the 5/8" inserted into the 3/4" for the rear stabilizer tube .

 


SimplePortal 2.3.7 © 2008-2020, SimplePortal