Author Topic: elevator fairlead placement  (Read 2437 times)

Offline grdev

  • Sr. Member
  • ****
  • Posts: 230
  • Total likes: 2
  • Noob
  • OS:
  • Windows NT 6.2 Windows NT 6.2
  • Browser:
  • MS Internet Explorer 10.0 MS Internet Explorer 10.0
elevator fairlead placement
« on: April 02, 2014, 01:55:06 PM »
on page 15 on the XL drawings it shows roughly where the fairleads should go. I ran a string and figured out where they all should go with the exception of the two right before the elevator horn. Are there any close up photos of those two, or better yet some dimensions? I'm starting to get surface rust and I want to get all my brackets I can welded in so I can put a little primer on.

Thanks

Offline rockiedog2

  • 2014 Donor
  • *
  • Posts: 317
  • Total likes: 7
  • Joe Spencer
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 28.0 Firefox 28.0
Re: elevator fairlead placement
« Reply #1 on: April 02, 2014, 05:08:39 PM »
>>>I'm starting to get surface rust

squirt it down with WD40

Offline Mike Gracey

  • Beta testers
  • ***
  • Posts: 20
  • Total likes: 0
  • Legal eagle XL
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Mozilla compatible Mozilla compatible
  • Eagle Type: XL
Re: elevator fairlead placement
« Reply #2 on: April 03, 2014, 03:25:34 AM »
Good tip Joe

Mike

 

SimplePortal 2.3.7 © 2008-2021, SimplePortal